Double Glazing Window Locks Repairs
Repairing double glazing window locks is crucial to keeping your home safe. A damaged hinge or handle could let draughts in to your home and expose your windows to burglars.
You can, however, fix the stiffness of uPVC handles or locks without having to replace your door or window. Sometimes, cooling or lubricating the mechanism can resolve any issues.
Broken Glass
Double glazing window locks can be worn out over time. The handles can become difficult to open or close. This could cause problems with ventilation and also pose a security threat. In order to rectify this, it's important to fix the window as soon as you can.
Double-glazed windows consist of two or more glass panes that have gas in between to provide insulation. Seals also hold the panes together. Condensation between the glass panes is usually an indication of an issue with one of these seals, and will need to be replaced. This usually involves replacing only one pane of the window and is less expensive than replacing the entire window.
Cloudiness and condensation are typically the result of a blown seal on double-glazed windows. This could be caused by a variety of factors, including air leaks, or the presence of moisture in the home. If you spot the issue, you need to contact a double-glazing expert to replace the gas seal and seal on your double-glazed windows.
It is possible to replace just one pan of double-glazed glass, however it is not recommended without the help of a trained professional. This is due to the fact that it requires specialized tools and skills to do the job safely. If you attempt to do it yourself, it could result in damage to the frame of the window or even to your personal health.
When a double-glazed windows is stuck, many people use a crowbar in an attempt to open it. But, it usually results in the frame getting bruised and dented. A specialist in window repair can remove the handle and open the window without causing further damage. They can also change the old window mechanisms into modern ones.
Over time, the hinges on windows get stiffer and more difficult to open, especially if the area is noisy. It is essential to regularly lubricate your window hinges with silicone spray. It is also essential to avoid closing the window heavy or closing it with the handles, as this can harm the hinges as well as the lock mechanism.
Broken Sash
This is a common problem for older double-glazed windows. If the upper sash has been ripped out of its pocket, it can be hard to lock it and then open the window. This is typically because the pins are disengaged or a balance shoe has been disconnected. Each sash is unique and therefore it is essential to know how yours are configured before you attempt to fix this.
It can be resolved by removing the sash and thoroughly cleaning it. This will also show if the sash is still an appropriate match. If not, you'll need to add sash stops in order to help keep it in place. They are available at the majority of hardware stores or on the internet. After you've cleaned the sash, you can replace the parting beads and then lubricate the pulley axles with a Teflon or silicone spray. Label the weights before removing them so you can reinstall them in the correct way.
Another common issue is a broken handle. It can be difficult to determine if your window handle is damaged however there are a few indicators. If the handle is stiff or clunky to operate or does not feel as if it's securely attached to the frame, then it's broken.
This could be due to a simple lack of use, but it's possible that the handle has cracked or even become detached. In some cases, the handle might be broken inside and can't be repaired however it's worthwhile to try fixing it when you spot the issue.
It may be necessary to take off the hinges that connect the window sash to the frame to remove it. It's not an easy task, so you'll need someone to help you hold the sash steady. After removing the hinges it is essential to clean them as well as the surrounding areas. It is also recommended to reattach the hinges and test the handle to make sure it's functioning properly. If it's not, you should consider replacing it. This will ensure that your window is as secure as it could be.
Broken Handle
It's not common for a window handle to break or become damaged over time. It is therefore essential that broken handles are repaired as soon as possible to avoid loss of functionality and security issues.
Fortunately, it is not difficult to change windows handles. The window handle can be replaced by anyone with a few DIY skills. Unlike the sash which is secured by a number of bolts, it only requires one or two screws. Once the new handle is in place, it's crucial to test it to ensure the mechanisms are functioning correctly. This should include locking the handle and looking for gaps that might let in drafts or allow potential thieves to gain access to your home.
The most common cause of the broken handle on a window is wear and tear resulting from regular use. A damaged handle could also be caused by excessive force or stress. If you force the window to open, it can put additional strain on the handle. This increases the likelihood of injury.
Other causes for a damaged hand include inadequate maintenance or aging, or design issues. Inadequate cleaning and lubrication can cause the handle to break down prematurely, and this is often the result of dirt or other debris that accumulates over time. The handle could also be damaged due to incorrect installation or issues with alignment.
If the previously mentioned fixes don't work, the Tasker might need to gain access to and take out the lock mechanism itself. This may involve removing the frame or 'breaking out' the window frame as well as bead made of plastic (to give the Tasker more room to maneuver). A new lock can then be fitted which is a similar profile to the current uPVC handle. The new handle will be re-attached and the process can be completed. Tasker will provide you with an estimate for the cost of repair in the event of this happening.
Faulty Lock
When window locks get damaged, it's important to have the problem fixed as soon as you can. A broken window can cause draughts, weaken security barriers and expose your home to burglary. Window lock repair is typically an easy task, but it is better to let an expert tackle the issue before it gets worse and cost more in the end.
UPVC window locks have two distinct varieties: espagnolette handles as well as cockspur handles. The first uses a central rod to operate the mushroom-like locking cams, which lock into window frame keeps. The latter is equipped with an attached handle to a spindle, which protrudes into the rod to activate the lock's cams that resemble mushrooms that are also referred to as locking mushrooms. The lock's latch then clips into a window frame's mortise that catches.
Both types of UPVC windows locks are susceptible to damage, especially in older homes. This can occur when the sash is damaged, warped, misaligned or even comes loose. In these instances, the lock must be replaced in order to avoid draughts or loss of energy efficiency. Tasker can repair the faulty lock for you, leaving you with the security of knowing that your windows are secure from intruders.
The first thing a Tasker can do to fix your double-glazing window lock is examine it and determine the issue. Once double glazing window repairs have all the data they require, they'll make their tools ready and arrive at your house. They'll typically bring a Phillips-head screwdriver, needle-nose pliers wood putty and fine-grit paper.
If the sash is misaligned the Tasker needs to loosen the screws that hold both parts of the lock to the window frame. Then, they'll remove the latch and then fill the mounting holes with wood putty (if necessary) and sand the area until it's flush with the rest of the window frame.
If the lock is rusted they'll clean it using a wire brush or oil and then lubricate it with grease to ensure it's running smoothly. They'll also make sure that the latch is in a good condition and re-install it.